Pre-assembled in the factory.

A complete range of dripper systems, pre-assembled in the factory,
to offer every grower the best solution at the lowest costs.

Each system is tailor-made to the specific greenhouse and offers the highest irrigation uniformity. The dripper sets are inserted in the heat reflecting Sunblock (white/black)
PE laterals and micro tubes. Or in the traditional black ones.

With the laterals supplied at reels of greenhouse basement length, the horizontal dripper outlets overcome leaking of the dripper connections to the laterals.

Also none to a minimum amount of the micro tubes will be bend. You will install
the pre-assembled laterals more easy and start the irrigation cycles directly without
any repair works.

In addition to these features a longer lifecycle is achieved by the high quality products, installation tools and the clear preventive cleaning instructions.

 

The wide range of professional integral drippers always offer the most optimum solution in performance and low costs.
The integral drip lines can be installed on the ground or in the ground and applied for pulse irrigation (Pressure Compensating None Drain).

All types of drippers are available inside the drip line:
Hydrolite (flat tape labyrinth), Hydrodrip (flat injection molded labyrinth), Hydrogol (round labyrinth), Hydro PC (round, pressure compensating) and Hydro PCND (round, pressure compensating and self closing).



Copyright © 2010, Meteor Systems, all rights reserved.